How To Use Ratchet Straps With Integrated Soft Loop  

© DC Cargo Mall 2020

Step 1: Thread Strap 

Press on the release latch and open the lever fully to expose the axle slot. If the axle slot is not facing upwards, pump the ratchet a few times until it is.

Ratchet straps lock your cargo into place for worry-free, dependable hauling. The built-in soft loops on this strap keep the hooks away from the cargo.

Follow this step-by-step guide to learn how to thread, tighten, and release this ratchet strap. (Click here for a PDF version of this guide)

Ratchet 2 or 3 times so that the ratchet mechanism gets a light grip on the feed end.

Pull on the feed end to eliminate the slack.

Step 3: Ratchet Tight

Once you’ve removed the slack, pump the lever until the strap is taut. You should see the webbing winding around the axle.

How to Loosen the Ratchet Strap

To undo the strap, press on the release latch while opening the ratchet lever completely flat past the 180 position. Grab the webbing from the adjustable side and pull it towards you to get slack.

How to Store the Ratchet Strap

Be sure that the straps are completely dry before storing. Consider storing your straps in an E-Track bag or toolbox to keep them accessible and safe.

Fold the excess webbing and tuck it under the strap. This will prevent it from getting underfoot or causing damage during transit.

A great thing about these straps is that they can also be used as a standard ratchet strap with snap hooks on both ends. 

Step 4: Lock into Place

Once you’ve tightened the strap, bring the ratchet to a completely closed position. This will lock the strap into place.

Do not overtighten. If you can’t fit your finger between the ratchet and the cargo, you’ve probably ratcheted it too tight.

Thread the feed end of the strap through the slot from the bottom. Pull the strap through to the front about 5 or 6 inches and slip under the ratchet mechanism.    

Step 2: Attach Hooks, Loop Around the Cargo and Eliminate Slack

Insert the snap hook on the feed side into an anchor point.

Then take the soft loop end, loop it around the cargo, and snap it into the D-ring.

Guides & Videos > Ratchet Strap With Soft Loop